The method of removing the trunk cover of a car varies depending on the car model. The general steps for removing the trunk cover of a car are:
1. Make sure the vehicle is turned off and all power is turned off. Make sure the surrounding environment is safe.
2. Find the opening handle or button of the trunk cover and open it.
3. Find the locking mechanism of the cover in the trunk, usually a pull rod or button.
4. Press or pull the locking mechanism to unlock the trunk cover. At this point, the cover should be able to open or close easily.
5. If you need to remove the cover completely, you may need to loosen the screws or other connectors that hold it. These parts are usually at the bottom or side of the inside of the trunk. Use a suitable tool (such as a wrench) to loosen the screws and remove them.
6. Carefully lift one side of the cover and remove it completely. Be careful not to damage the cover or collide with surrounding parts during the operation.
7. Put the cover back in place, reinstall the screws and tighten them. Make sure the locking mechanism is reset correctly.
8. Close the trunk door to ensure it is securely locked.
There may be several reasons why the trunk pops up automatically:
1. The hinge mechanism has too much resistance or is deformed, and the hinge needs to be lubricated or replaced;
2. The trunk opening motor is faulty and needs to be replaced;
3. You can go to the 4S shop to install a new type of trunk cover cushion, which is suitable for the situation where the trunk starts to open a little and then falls down and feels that it cannot be lifted up.
If the trunk pops up automatically without being unlocked, you may need to check whether there is a problem with the trunk door mechanism.
There are many ways to open the trunk from outside the car: directly press and hold the unlock button, the trunk will also be unlocked after pressing the unlock button, smart sensor key, trunk opening button, etc. The specific location varies depending on different manufacturers and different models. Generally speaking, it is nothing more than the left side of the steering wheel or the central control area.
The pull-rod trunk is generally on the lower left side of the driver’s seat or the lower left side of the steering wheel, and there will be an icon of a car trunk tilted up on it. Usually together with the fuel tank cap pull rod.
If the model is not equipped with a button or a lever, it means that the trunk is locked in conjunction with the door. As long as the central lock is opened, the trunk can be opened from the back.
There is also a way to open the trunk using a foot-kick sensor switch. The owner only needs to gently sweep his foot under the trunk, and the trunk lid will open elegantly. However, this method requires certain skills, and the models that support this function are generally mid-to-high-end models.
The chevy colorado tonneau cover product supplied by OSIASPART is easy to install and remove, and is not easy to pop up automatically.
Related Products：
Lois Lane is a professional blogger and a seasoned Content writer for wellhousekeeping.com. With a passion for simplifying complex Home Decor topics, he provides valuable insights to a diverse online audience. With four years of experience, Lois has polished his skills as a professional blogger.
